Day Four:

EXPLAIN #4: Why Do They Float and Sink?

Teacher Notes
Student Activity Sheet

To print out this document in its entirety click here now.
(This file is a PDF file and requires the free Adobe Acrobat Reader).

Teacher Notes

Purpose: To help students understand the concept of floating and sinking using solutions of different density. Students in grades 5 and 6 may need more help with these questions than students in grades 7 and 8. This part of the Learning Cycle is where direct instruction occurs and new vocabulary is introduced. Students will be introduced to the concept of density in terms of floating and sinking of plastic pellets. The following chart will be used as a reference. Please note that you will be using “flexible “PVC and “solid “ PS. “Rigid” PVC has a density of 1.36 –1.40 g/mL; “Foam” PS would be less than 1.00 g/ml.

Materials: Activity sheets for each student and the flow chart.

Time: one class period

Advanced Preparation: Three Teacher demonstrations
Let students have time to predict and write answers before each.

A. Place a cork and a penny in a cup of water.
B. Place all six plastic pellets in 70% isopropyl alcohol.
C. Place six plastic pellets in concentrated calcium chloride solution.

Explanation of Lab Activity:
Students will be placing all six recycled resins into water to watch them float or sink. The three that float in water are less than 1.00 g/mL and these are: HDPE, LDPE, and PP. See the chart on densities for the actual numbers. Plastics will vary in density when they are manufactured so there is a range of densities for each kind of plastic. Pure metals have an exact density and not a range.

When the three floaters are placed in 70 % isopropyl alcohol, one plastic, PP will float since it is less dense than the alcohol solution that has a density of about 0.92 g/mL. By adding water (a more dense liquid) to the alcohol solution, the new solution will become more dense to about 0.94 g/mL. The next separation is when HDPE still sinks in the solution but LDPE floats.

On the other side of the flow chart, the sinkers in water will be added to a very concentrated calcium chloride solution. All three resins will float since they are less dense than the 1.40 g/mL solution of calcium chloride. As water (1.00 g/mL) is added to the dense solution, the new solution becomes less dense and the first resin to sink will be PETE, the most dense of the six. The second test solution has even more water added. The solution for test #2 is about 1.12 g/mL so that PVC sinks and PS stays floating.

Key to questions:

1. Using your notes, place the letters of the three least dense pellets here: M, Z, X
2. Rank these three pellets from the least dense to the most dense based on your observations. HINT: 70% alcohol has a density of 0.92 g/mL and when water is added to it the density gets larger since water has a greater density (1g/mL). Place letters in the blanks.
   Least dense ______M______, middle density ______Z_______, most dense _____X___
3. Look at the density table for plastics:
   Predict which letter from question 2 is which plastic.
   Letter M is PP #5
   Letter Z is LDPE #4
   Letter X is HDPE #2
4. Now rank those resins that are more dense than water in order from the least dense to the most. HINT: As you add water to the concentrated calcium chloride solution, the resulting solution will be less dense.____W_____, ______P_____, ______Y_____
5. Using your notes from the flow chart and the density chart of plastics, you should be able to match the plastics with the letter of the resins.
   Letter W is PS #6
   Letter P is PVC #3
   Letter Y is PETE #1
6. The plastics names are listed below:
   1. PETE - polyethylene terephthalate
   2. HDPE - high-density polyethylene
   3. PVC - polyvinyl chloride
   4. LDPE - low-density polyethylene
   5. PP - polypropylene
   6. PS – polystyrene

Why do all the names have the prefix “poly” in them?
Plastics are made out of polymers, or long-chain molecules. Poly means “many”, referring to many repeating units.

Evaluation Question:

Part One: A ship carrying plastic pellets has a spill in the port of Chicago on Lake Michigan. All the containers are labeled “RECYCLED PLASTIC # 3”. What will you see on or in the water around the ship? Explain. Lake Michigan is a fresh water port so #3 plastic is PVC; it sinks in fresh water.

Part Two: Would it make any difference if the ship were in New York or Los Angeles? Explain. Yes, it makes a difference because these are salt water ports. Ocean water is about 3.5% salt. Salt water is more dense than tap water. The question now is what is the density of salt water compared to the plastic pellets? Students will need time to experiment to find the answer.

Design an experiment to test your answer in part two. Write your procedure here. (This may be done as a class activity.)
Students will need to write something like the following: (Given ocean water is 3.5% salt.)
1. Place 96.5mL of water in a container and add 3.5 grams of NaCl. Stir to dissolve.
2. Place two pellets of PVC in the solution. Stir to dislodge any bubbles. Observe.

Recycle Codes For Plastics 1 = PETE = Polyethylene terephthalate 2 = HDPE = High-density polyethylene 3 = PVC or V = Polyvinyl chloride 4 = LDPE = Low-density polyethylene 5 = PP = Polypropylene 6 = PS = Polystyrene

back to top

Student Activity Sheet

EXPLAIN #4: Why Do They Float and Sink?

Student Activity Sheet Name:_________________________

Your Mission: You have just completed the task of identifying the pellets for the plastic factory. You have taken extensive notes on the pellets sinking and floating in the three liquids. Your job is to analyze the data and determine which plastic is which resin.

Purpose: To match the resin pellets with the correct recycled plastic symbols and names.

Teacher demonstrations:

A. Predict what will happen when a cork and a penny are dropped into a cup of water.

If _________________________________________________________________,

then _______________________________________________________________.

Watch the demonstration. Were you correct? ____________

B. Predict what will happen when all six plastic pellets are dropped into 70% isopropyl alcohol.

If _________________________________________________________________,

then _______________________________________________________________.

Watch the demonstration. Were you correct? ____________

C. Predict what will happen when all six plastic pellets are dropped into saturated calcium chloride solution.

If _________________________________________________________________,

then _______________________________________________________________.

Watch the demonstration. Were you correct? ___________

Definitions:
Water has a density of 1.00 gram/mL. So those objects with a density of less than 1.00 gram/mL will float in water. 70% isopropyl alcohol has a density of about 0.92 g/mL so those pellets with a density of less than 0.92 g/mL will float in alcohol. One can conclude that objects that are less dense than the liquid they are placed into will float.

What is true about objects that are more dense than the liquid they are placed in?

_______________________________________________________________________

________________________________________________________________________

The calcium chloride solution has a density of about 1.40g/mL. If you placed a penny that sinks in water into the calcium chloride solution, what will happen? The density of a penny is about 8.00 g/mL.

If _________________________________________________________________,

then _______________________________________________________________.

Conclusions about the plastic pellets and their relative densities:

1. Using your notes, place the letters of the three least dense pellets here: ____,____,___

2. Rank these three pellets from least dense to most dense based on your observations. HINT: 70% alcohol has a density of 0.92 g/mL and when water is added to the solution, the density of the new solution gets greater since water has a greater density (1.00 g/mL). Place letters in the blanks.
Least dense ____________, middle density _____________, most dense _____________

3. Look at the density table for plastics:
Predict which letter from question 2 is which plastic.

Letter ______ is PP #5
Letter ______ is LDPE #4
Letter ______ is HDPE #2

4. Now rank those resins that are more dense than water in order from the least dense to the most. HINT: If you add water (1.0 g/mL) to the calcium chloride solution (1.40g/mL), then the resulting solution will be less dense ________, _________,__________

5. Using your notes from the flow chart and the density table of plastics, you should be able to match the plastics with the letter of the resin.

Letter _____is PS #6
Letter _____is PVC #3
Letter _____is PETE #1

6. The plastics names are listed below:

1. PETE - polyethylene terephthalate
2. HDPE - high-density polyethylene
3. PVC - polyvinyl chloride
4. LDPE - low-density polyethylene
5. PP - polypropylene
6. PS – polystyrene

Why do all of the names have the prefix “poly” in them?

______________________________________________________________________________

Evaluate: (Answer in your logbook.)

Part One: A ship carrying plastic pellets has a spill in the port of Chicago on Lake Michigan. All the containers are labeled “RECYCLED PLASTIC # 3”. What will you see on or in the water around the ship? Explain.

Part Two: Would it make any difference if the ship were in New York or Los Angeles? Explain.

Design an experiment to test your answer in part two. Write your procedure in your logbook.

back to top